Active Driving Display - Mazda 3 2018 Smart Start Manual

ACT I VE DRIVI NG DISP LAY
(I F EQUIPPED)

ACTIVE DRIVING DISPLAY

To change the settings/adjustments for the Active
Driving Display:
1 Select the Settings icon on the Home screen.
2 Select the AD-Disp tab.
3 Select the desired item to change.
HEIGHT: Adjust the position of the virtual image of
the Active Driving Display up or down.
BRIGHTNESS CONTROL: Method for adjusting
screen brightness (automatically with instrument
cluster illumination or manually).
CALIBRATION: Brightness initialization setting
(when selecting automatic adjustment).
BRIGHTNESS: Brightness adjustment (when
selecting manual adjustment).
NAVIGATION: On/Off.
ACTIVE DRIVING DISPLAY: On/Off.
RESET: Reset to default settings.
NOTE:
• If the display does not operate, switch the ignition
OFF and then switch it back ON. If it still does not
operate even with the ignition switched ON,
have the vehicle inspected at an Authorized
Mazda Dealer.
• It may be difficult to view the display when wearing sunglasses.
Take off your sunglasses or adjust the luminosity.
• If the battery has been removed and re-installed or the battery
voltage is low, the adjusted position may deviate.
• The display may be difficult to view or be temporarily affected by
weather conditions such as rain, snow, light, and temperature.
Vehicle Speed Setting
using cruise control
Navigation Turn-By-Turn
(TBT) direction, distance
and lane guidance
Traffic Sign Recognition
(TSR) using navigation
55
Speed Limit
IF EQUIPPED
Lane Departure Warning
System (LDWS) operation
conditions and warnings
Smart Brake Support
(SBS) warnings
Vehicle Speed Setting
using cruise control
CAUTION:
Always adjust the
display using the
Settings screen
(AD-Disp tab).
Do not try to
adjust the angle
or open/close the
display by hand.
Fingerprints on
the display will
make it difficult to
view and manual
operation could
cause damage.
m{zd{
23
3