Voice Control - Mazda 3 2018 Smart Start Manual

VOICE CONTROL

VOICE CONTROL
Voice control is activated by pushing the TALK button on the steering wheel and
speaking a command. Voice commands usually contain a verb (action word) followed by
a noun. Common verbs are "Go to" and "Play". See Audio Controls for some common
voice commands (p. 38).
Talk
USEFUL COMMANDS:
"CALL <phonebook contact name>
<mobile/home/work>"
(Example: "Call John Smith mobile")
"DIAL <number>" (Example: "Dial 911")
"REDIAL" – This command makes a call
to the last person you called (the top
person listed on Outgoing call history).
NOTE:
After becoming familiar with the system, you can skip the voice prompts by
pushing the TALK button again.
OTHER COMMON VOICE COMMANDS:
"HELP" - This command lets you know the available VR commands per display.
"TUTORIAL" - MAZDA CONNECT overall introduction.
"ADDRESS" - This is a useful command for navigation to enter an address.
IMPORTANT:
• Make sure to say your command AFTER THE BEEP SOUND.
• You can skip the system's prompt anytime by pushing TALK button.
• You can end your voice recognition session either by pushing the hang-up button on
the steering wheel or by operating the commander switch.
Voice control
switch
"CALLBACK" – This command makes a call
to the last person who called you (the top
person listed on Incoming call history).
"DRIVE HOME" /
"NAVIGATE HOME" / "TAKE ME HOME"
Any of these HOME commands sets the
destination to your home address.
17
m{zd{ 3