Table of Contents
Advertisement
3.1.6 Removing the SCART board
(See Fig.7 and 8)
• Remove the top cove, USB board, DSP board and HDMI
board.
(1) Remove the six screws L attaching the SCART board.
(See Fig.7)
(2) Disconnect the card wire from
SCART board. (See Fig.8)
3.1.7 Removing the input board
(See Fig.9 and 10)
(1) Remove the seven screws M attaching the input
(2) Remove the three screws N attaching the input board. (See
Fig.10)
(3) Disconnect the each wire from each connector of the input
board.
3.2
Other item
For the other items, please refer to RX-D701S,RX-D702B No.MB441.
1-8 (No.MB500)
CN537
and
CN539
of the
L
L
L
Fig.7
CN539
CN537
SCART board
Fig.8
M
Fig.9
Input board
N
Fig.10
Advertisement
Table of Contents
