Table of Contents
Advertisement
English
Safety Notes
Read and observe all instructions. The integrated protec-
tions in the measuring tool may be compromised if the meas-
uring tool is not used in accordance with the instructions
provided. SAVE THESE INSTRUCTIONS FOR FUTURE
REFERENCE.
Have the measuring tool repaired only through qualified specialists
using original spare parts. This ensures that the safety of the measuring
tool is maintained.
Do not operate the measuring tool in explosive environments, such as
in the presence of flammable liquids, gases or dusts. Sparks can be
created in the measuring tool which may ignite the dust or fumes.
When using the angle information provided by this tool to cut work-
pieces, always strictly observe the safety and working instructions of
the saw being used, including those for positioning and clamping the
workpiece. When the required angles can not be set on a certain saw or
saw type, alternative sawing methods will need to be applied. Extremely
acute (sharp) angles can be cut using a taper jig with a table saw or a cir-
cular saw.
Product Description and Specifications
Please unfold the fold-out page with the representation of the measuring tool
and leave it unfolded while reading the operating instructions.
Intended Use
GAM 220: The measuring tool is intended for measuring and transferring an-
gles (horizontal and vertical), e.g. for customisations in interior fitting work,
in staircase construction or on exterior panelling. It is suitable for indoor and
outdoor use.
GAM 220 MF: The measuring tool is intended for measuring and transferring
angles and for calculating simple and compound mitre angles. It is suitable
for indoor and outdoor use.
Product Features
The numbering of the product features shown refers to the illustration of the
measuring tool on the graphic page.
1 Fold-out leg
2 Viewing window for display
3 Locking wheel
4 Base leg
5 Battery lid
6 Latch of battery lid
7 Display
8 Spirit level for horizontal alignment
9 Spirit level for vertical alignment
10 Serial number
11 "HOLD" button
12 "ON/OFF" button
13 Button for rotating the display
14 "MTR1" button for simple mitreGAM 220 MF
15 "MTR2" button for compound mitreGAM 220 MF
16 Protective pouch
17 Leg extension
English | 13
Advertisement
Table of Contents
