Date/Time - Polaris NG7 User Manual

NG7 User Manual Polaris 16/05/2017 3:40 pm Page 20
Setup
Date & Time
It is important to make sure that the date and time is set correctly as it will affect what date and time
appears on your dash cam footage.
You can either set the date and time up manually or you can choose to set it up so that date and time
syncs with the navigation time.
Manual Setting
Set the correct UTC+ time applicable to your location.
Important: If your area has switched over to daylight savings, you will need to change the UTC+ time
accordingly otherwise the wrong date and time may appear on your dash cam footage. Please see below
the correct daylight savings UTC+ times:
+11:00 Canberra, Sydney, Hobart, Melbourne.
+10:30 Adelaide.
Once daylight savings has ceased, please change it back to the correct UTC+ time.
- 20 -