Installation; Fabui Overview - FABtotum Personal Fabricator User Manual

FABtotum Complete Manual
SLICING WITH CURA 2.X
Cura is an open source software created and developed by Ultimaker. The FABtotum can work with .gcodes generated with
Cura.
To upload one on the FABUI, refer to the FABUI overview.
Note: for legacy Cura 1.5 support, please refer to "Cura 1.5"

Installation

Installing Cura
Download and install version 2.xx of Cura at: https://ultimaker.com/en/products/cura-software
Locate Cura on your computer's Download folder, install it and then execute it.
Installing with Windows
Double click on the installer located in your download folder.The setup procedure will ask you to choose if you want the
program to open other file formats other than .stl (i.e. .obj).
www.fabtotum.com
| 27