First Setup - FABtotum Personal Fabricator User Manual

FIRST SETUP

Now it's time to do the first setup and unit calibration!
The unit Calibration of the FABtotum is a critical step in all future operations. A non-calibrated unit is unable to perform
most basic task like printing and milling. Using a non-calibrated hardware could even damage the unit in the long run!
After unboxing, setting up the machine and connecting to it with your favourite browser, you'll be prompted with a
setup/configuration wizard.
Once connected to the FABtotum via ethernet cable, you'll be prompted to initialize the unit operating system
(FABUI Colibri) click ok and follow the instructions to proceed.
The OS will be installed in a few minutes.
www.fabtotum.com
FABtotum Complete Manual
| 10