Sharp ES-GFD814QW3-FR User Manual page 98

CHAPTER -9: MAINTENANCE AND CLEANING OF YOUR
MACHINE (WATER INLET FILTERS)
Filters to avoid dirt and foreign substances in the water from
penetrating into the machine are available both on the side of
faucet and on the ends of water valves along the water inlet
hose of your machine.
If your machine cannot intake sufficient amount
of water despite water faucet being open, these
filters should be cleaned.
(It is recommended that you clean your pump
filter once in 2 months.)
• Detach the water inlet hoses.
• Remove the filters on water inlet valves using
pliers and then clean it with a brush in water.
• Disassemble the filters on the side of faucet
side of water inlet hoses manually and clean it.
• Having cleaned the filters, you can re-fit them
in the same way in reverse.
CAUTION:
Filters of water inlet valves may be
clogged due to contaminated water faucet
or lack of necessary maintenance or valves
may be broken down, causing water leaking
into your machine continuously.
The breakdowns that may arise due to
these reasons are out of the scope of
warranty.
EN -98-