Displaying Maintenance Mode - JVC SR-HD1250US Service Manual

5.9

DISPLAYING MAINTENANCE MODE

MAINTENANCE MODE contains information about the HDD and the drive unit.
(1) Displaying MAINTENANCE Top Menu
a) Turn off the power of the main unit.
b) Press the [REC] button and the [RESET] switch on the main unit at the same time.
c) "SERVICE" is displayed in the display window on the main unit. In about 30 seconds, the MAINTENANCE Top Menu is
displayed on the TV screen.
d) To exit MAINTENANCE MODE, press the POWER button on the main unit.
(2) Displaying Product Information
Product Information contains the firmware version information of the main unit and the drive unit.
a) While the MAINTENANCE Top Menu is displayed, press the [1] button on the supplied remote control to display Product
Information on the TV screen.
b) To go back to the MAINTENANCE Top Menu, press the [Return] button on the remote control.
To exit MAINTENANCE MODE, press the POWER button on the main unit.
1-12 (No.YD125<Rev.001>)
MAINTENANCE MODE
Press key
[1] key : Product Information
[2] key : Temperature Information
[3] key : Laser Diode Information
[4] key : HDD SMART Information
[5] key : REBOOT COUNT Information
[Power off] : Exit
MAINTENANCE MODE > Product Information
[Return] : Top Menu, [Power off] : Exit
<<<Reviesion>>>
Middle Ware Version
NAND Version
Application Version
NOR Version
Drive Version
ID : xxxx
Farm Version : xxxx
<<<Information>>>
Vendor Name : JVC
Model Name : SR-HDxxxx
1394 Serial Num : xxxxxxxxx
: xxxx
: xxxx
: xxxx
: xxxx