Step 4. Connecting Ac-Trunk Cables To Junction Box - Projoy Prosol-M600 User Manual

Step 4. Connecting AC-TRUNK Cables to Junction Box

Connect the AC-TRUNK cables coming from the MICRO inverters to the junction box. Close
the junction box after the wiring is complete. Ensure that the seal is tight.
To prevent electrical hazards, all the connection operations must be carried out
equipment disconnected from the grid
All the external connections to the insulated junction box (caps, adapters, etc.)must be made
with securely-sealed Projoy components.
Projoy AC cables from the Micro-inverters have three conductors with different colors to identify the
function of each conductor:
Red: Live
Black: Neutral
Yellow-Green: Ground
Pay special attention and ensure not to reverse the phase with the neutral!
The installation technician is responsible for selecting a junction box with the appropriate
dimensions and insulation.
The installation technician is responsible for selecting a cable running between the junction box
and the load distribution panel with the appropriate length and cross section.
Fig.6. Junction Box
.
with the
11