Table of Contents
Advertisement
REHiNGING
OF DOORS
The refrigerator
is designed so that the doors
can be opened right or left depending on the
layout of your kitchen.
ACAUTION!
1. Prior to hinging the door to the opposite
side, first of all unload the refrigerator
from
foodstuffs
and remove all unsecured
accessories
(shelves and drawers) from it.
2. To tighten and loose bolts, use a socket
wrench or a box wrench for I0 mm.
3. Do not lay the refrigerator onto the floor.
4. Take care to exclude dropping of the door
in the process of disassembly
or assembly.
Remove the plastic bushing O from the
door of the refrigeration
compartment O.
Unscrew the screw @ located above the
door of the refrigerator
and move the door
stop O to the opposite side. Tighten the
screw @. Move the plastic bushings O
and _ (only for models with an internal
display) to the opposite side.
1. Unscrew the screw O of the upper hinge
coverO
to remove the hinge cover O and
disconnect
the connection cable O
(only for models with an external display).
Unscrew the bolts O fixing the upper
hinge O and carefully remove the door
from the middle hinge @.
Remove the blank O.
For external
display
3. (Only for models with an external display).
_
Using a flat screwdriver, push and separate
the caps @ from the front panel@
and unscrew the screws_},
remove the
panel O, move the cable @to the
opposite side. After installation
of the
panel @ into place, tighten the screws@
and close their heads with the caps @.
2. Remove the upper door cover O
(only for models with an external display),
pull out the cable O and install it to the
hole on the opposite side of the door.
Install the upper door coverOinto
place.
4. Unscrew the bolts O of the middle hinge,
remove the middle hinge and raise the door
of the freezing compartment
O to remove
the door. Remove the blank _) and install
it instead of the removed middle hinge @.
Advertisement
Table of Contents
