Motion Computing LE1600 User Manual page 91

The system doesn't recognize
a USB device.
The Tablet PC is sitting in the
Motion FlexDock for the LE
Series, or the Motion
MobileDock for the LS Series
but the system doesn't
recognize any accessory
devices, such as the external
monitor or DVD/CD RW.
A
UDIO
No sound is coming from the
built-in speakers.
No sound is coming from any
speakers.
I've forgotten my BIOS
password and can't access my
system.
The program I'm working in
has stopped responding, but
the cursor moves and other
programs work.
Windows XP may take a short
time to recognize the device.
The accessory isn't connected
to the Tablet PC correctly.
The correct driver isn't built into
Windows XP.
The Tablet PC isn't fully
seated.
Connecting a headset or
external speakers mutes the
built-in speakers.
Audio volume is too low or has
been muted.
The Tablet PC will let you enter
several passwords incorrectly
before it temporarily locks the
system.
The program has crashed.
Motion Computing LE1600 and LS800 Tablet PC User Guide 85
Wait until Windows XP
recognizes the device.
Check the connection cable
and be sure it is inserted into
the correct port on the Tablet
PC and the accessory device.
Use the device's installation
CD or check the
manufacturer's website for the
correct driver.
Reseat the Tablet PC in the
Motion FlexDock for the LE
Series, or the Motion
MobileDock for the LS Series.
Disconnect the headset or
external speakers if not in use.
Open the Motion Dashboard
and adjust the speaker volume
by sliding the volume slider or
uncheck the Mute button.
Turn the Tablet PC off and
back on and try re-entering
your password (you can do this
as many times as needed). If
you have forgotten your
password, contact Motion
Computing Technical Support
for information about unlocking
your system at
www.motioncomputing.com/
support.
Press the Security button
(small button with a key icon)
on the Tablet PC front panel to
open the Task Manager and
end the non-responsive
program.