Administration > Factory Defaults - Cisco Linksys RE1000 User Manual

Linksys RE1000
Administration > Diagnostics
Diagnostics
Ping Test
Ping checks whether the IP or URL address is reachable
IP or URL Address
Enter the IP or URL address you want
to test
Packet Size
Enter the packet size you want to send The
default is 32 bytes
Number to Ping Enter the number of times you wish to
test the connection The default is 5
Start Test
To run the test, click this option The Ping
screen shows if the test is successful Click Close to return
to the Diagnostics screen Click Stop to stop the test
Diagnostics > Ping
Administration > Factory Defaults
The Factory Defaults screen allows you to restore the
Extender's configuration to its factory default settings
NOTE:
Do not restore the factory defaults unless
you are having difficulties with the Extender
and have exhausted all other troubleshooting
measures Once the Extender is reset, you
will have to re-enter all of your configuration
settings
Wireless-N Extender
Chapter 2: Advanced Configuration
Administration > Factory Defaults
Factory Defaults
Restore Factory Defaults
To reset the Extender's settings
to the default values, click this option Any settings you
have saved will be lost when the default values are restored
Administration > Firmware Upgrade
The Firmware Upgrade screen allows you to upgrade the
Extender's firmware Do not upgrade the firmware unless
you are experiencing problems with the Extender or the
new firmware has a feature you want to use
Administration > Firmware Upgrade
NOTE:
The Extender may lose the settings
you have customized Before you upgrade
its firmware, write down all of your custom
settings After you upgrade its firmware, you
will have to re-enter all of your configuration
settings
Firmware Upgrade
Before upgrading the
Extender's firmware upgrade file from the website,
www.linksys.com/support
Please select a file to upgrade
the firmware upgrade file
Start Upgrade
After you have selected the appropriate
file, click this option, and follow the on-screen instructions
firmware, download the
Click Browse and select
11