Date; Timer; Learning Mode; Demo Mode - Whirlpool GH7208XR Use & Care Manual

The date may be set and displayed on the Main Menu screen.
The default setting is Jan. 1 of the current year; however, it is not
displayed.
To Set Date:
1. On Main Menu, touch "Settings & Info."
2. On Settings & Info screen, touch "Date."
3. On Date screen, use Month "+" or "-" and Day "+" or "-"
controls to set the month and day.
4. Touch "Adjust Year,' and change the year, if desired.
To Display/Hide Date: On Date screen, touch "Display Date."
The display will immediately return to the Main Menu. Repeat to
hide the date.
The Timer can be set in minutes and seconds, up to 99 minutes,
59 seconds, and counts down the set time.
NOTE: The Timer does not start or stop the oven.
The Timer countdown can be seen in full screen or in minimized
view. In minimized view, the countdown is visible on the Main
Menu and during programming of a cook function.
A
A. Minimized Timer countdown
While the Timer is in use, the oven can still operate. During an
oven operation, the Timer countdown will remain in the
background (not visible). If the Timer ends while oven is still
operating, the end-of-Timer tones will sound, and the set
operating mode will remain active on the screen.
To Set Timer:
1. Touch TIMER control.
2. Using the "+" and "-" controls or the number pads, enter
desired time in minutes and seconds, and then touch "Start

Timer."

The countdown will be in full screen view.
3. Touch "OK" to minimize the countdown.
To see the countdown in full screen view, touch TIMER control.
The time can be reset during the countdown by touching TIMER,
entering a new time, then touching "OK," or the START control.
To Cancel: Touch TIMER control, then touch "Cancel Timer."
14

Date

Timer

Learning Mode

The Learning Mode is ideal for learning how to use the oven.
When set, functions can be entered, with real displays and tones,
without actually turning on the microwave generator (magnetron),
grill element or convection element. While functions are operating
in the Learning Mode, the oven light will come on, the fan will run,
and the turntable will rotate (if set ON).
While the Learning Mode is active, the Learn indicator is visible in
the lower, left command area. The indicator is visible while the
oven is inactive (Main Menu screen), during programming, and
during Settings & Info menu navigation. It is not visible during a
cooking cycle.
The Learning indicator shares the lower, left command area with
the Timer countdown if both are in operation.
A
A. Learning mode indicator
To Activate Learning Mode:
The oven must be off.
1. On the Main Menu, touch "Settings & Info."
2. On Settings & Info screen, touch "More Choices."
3. Touch "Learning Mode."
4. Touch "On" or "Off" to set.
5. Touch "OK."

Demo Mode

The Demo Mode highlights the features and capabilities of the
oven in a slide show on the display.
To Activate Demo Mode:
1. On the Main Menu, touch "Settings & Info."
2. On Settings & Info screen, touch "Demo Mode."
The demonstration immediately begins. You can move
forward or back in the demonstration by touching "Next
Page" or "Back," or wait for the screen to advance. When the
demonstration is over, it automatically loops back to the
beginning and starts again.
3. Touch "Cancel Demo" on the touch screen, or touch CANCEL
control to cancel Demo Mode and return the display to the
Main Menu.