3.1.4 Removing the DVD mechanism (See Fig.8)
(1) Disconnect the connector wire from USB board connected
to connector
CN811
of the DVD board.
(2) Remove the two screws E attaching the both side of the
DVD mechanism.
(3) Disengage two hooks b engaged both side of the DVD
mechanism.
3.1.5 Removing the Front panel (See Fig.9, 10)
(1) Remove the three screws F attaching the Front panel. (See
Fig.9)
(2) Disengage one hook c engaged Front panel. (See Fig.9)
(3) Disengage two hooks d engaged both side of the Front
panel. (See Fig.10)
d
hook
E
CN811
hook
Fig.8
c
hook
F
Fig.9
Fig.10
3.1.6 Removing the Amp board (See Fig.11)
(1) Disconnect the connector wire from power board connect-
ed to connector
(2) Remove the two screws G attaching the Amp board.
b
CN601
3.1.7 Removing the Power board (See Fig.12)
(1) Remove the four screws H attaching the Power board.
H
3.1.8 Removing the iPod board (See Fig.13)
(1) Remove the six screws J attaching the iPod board.
3.1.9 Removing the iPod switch board (See Fig.13)
(1) Remove the one screw K attaching the iPod switch board.
J
CN601
of the Amp board.
G
Fig.11
Fig.12
Fig.13
(No.MB726<Rev.001>)1-9
H
K