Chapter 3. Ip Wizard; Installation - Planet Wired / Wireless IR IP Camera ICA-108 Quick Installation Manual

Chapter 3. IP Wizard

This chapter shows how to quick set up your ICA-108/ICA-108W. The ICA-108/ICA-
108W is with the default settings. However to help you find the networked camera
quickly the windows utility-IP Wizard can search the cameras in the network
that shall help you to configure some basic setting before you started advanced
management and monitoring.

3.1 Installation

In the installation steps below, this guide use ICA-108 as the
example. However, the steps for ICA-108W are similar.
Note
1. Insert the bundled CD into the CD-ROM drive to launch the autorun program.
Once completed, a welcome menu screen will appear.
2. Click the "IP Wizard" hyperlink; you will see the InstallShield Wizard dialog box
as below.
If the welcome screen does not appear, click "Start" at the taskbar.
Then, select "Run" and type "D:\Utility\setup.exe", assume D is
your CD-ROM drive.
Note
3. The "Welcome to the InstallShield Wizard for IP Wizard" will display on the
screen and click "Next" to continue.