Image Menu - Planar PD7010 User Manual

Image Menu

Press the Menu button to open the OSD menu. Press the cursor
Image menu. Press the cursor
to change values for settings, and then press Enter to confirm the new setting.
i
teM
Brightness
Contrast
Sharpness
Color
temperature
Color
saturation
Color tint
Gamma
Color space
Video
standard
button to move up and down in the Image menu. Press
▲▼
Press the cursor ◄ ► button to adjust the brightness.
(Range: 0 – 100)
Press the cursor ◄ ► button to adjust the contrast.
(Range: 0 – 100)
Press the cursor ◄ ► button to adjust the display sharpness
(Range: 0-100)
Press the cursor ◄ ► button to adjust the video tint/hue.
(Options: 9300K – 7500K – 6500K – 5000K)
Press the cursor ◄ ► button to adjust the video saturation.
(Range: 0 – 100)
Note: Color saturation is available for Video and S-Video modes
only.
Press the cursor ◄ ► button to adjust the video tint/hue.
(Range: 0 – 100)
Note: Color tint is available for Video and S-Video modes only.
Press the cursor ◄ ► button to adjust the gamma correction of the
display.
(Options: Film, Video, Cinema, Photo, PC)
Press the cursor ◄ ► button to adjust the color space.
(Options: Auto – RGB – YPbPr- YCbCr)
Color space is available for component, PC, HDMI, and DVI
Note:
modes only.
Press the cursor ◄ ► button to adjust the Video Standard.
(Options: Auto, NTSC, PAL, SECAM)
Note: Video standard is available for Video and S-Video modes
only.
◄ ►
d
eScriptiOn
22
button to move to the
d
efault
50
50
50
6500K
50
50
PC [VGA]
Video [DVI,
HDMI,
Component,
Video,
S-Video,
and SCART]
Auto
Auto
◄ ►