Service Menu
Press the Menu button to open the OSD menu. Press the cursor
Service menu. Press the cursor
i
teM
Model name
Unit S/N
Software
version
Active source
Pixel clock
Signal format
H/V refresh
rate
Sync type
Lamp hours
Lamp hour
hour
Reset
Test pattern
button to move up and down in the Service menu.
▲▼
Displays the model name of the device
(PD4010, PD7010 or PD7060)
Displays the serial number of the device.
Displays information about the software version.
Displays the active source.
Displays information about the sampling rate.
Displays information about the type of signal format.
Displays the refresh horizontal and vertical refresh rates.
Displays information about the sync type signal.
Shows the number of hours lamp has been in use for Eco and
Normal modes.
After replacing the lamp, this item should be reset. Refer to "Re-
placing the Projection Lamp" on page 31.
Displays information about the type of test pattern (Range: None,
Solid, Checkerboard, Vertical Ramp, Horizontal Ramp, Grid, Hori-
zontal Lines, Vertical Lines, Diagonal Lines, Splash Screen).
◄ ►
d
eScriptiOn
0
button to move to the
d
efault
These
items are
display
only.
None