Setting Up
Elevator Button
12
English
Adjusting the Projected Image
Adjusting the Projector Image Height
The projector is equipped with elevator foot for adjusting the
image height.
To raise the image:
1. Press the elevator button
2. Raise the image to the desired height angle
release the button to lock the elevator foot into position.
3. Use screw in feet
To lower the image:
1. Press the elevator button.
2. Lower the image, and then release the button to lock the
elevator foot into position.
3. Use screw in feet
1
.
to fi ne-tune the display angle.
to fi ne-tune the display angle.
2
Elevator Foot
Tilt Adjusting Foot
, and then
3