Troubleshooting - Planar XP37W User Manual

Troubleshooting

There is no picture or sound.
There is no picture from AV.
There is no sound.
There is no picture or sound, just noise.
64
‧ Make sure the AC adapter is connected.
‧ Verify that there is a valid source signal.
‧ Make sure the correct input mode is selected.
‧ Make sure the master power switch has been turned on.
‧ Make sure the BRIGHTNESS is properly adjusted.
‧ The florescent lamp may have reached the end of its life.
Contact an authorized service center.
‧ Make sure the video source is plugged into the composite
video-in port.
‧ Make sure the volume is not set to minimum.
‧ Make sure the sound is not muted
‧ Make sure that headphones are not connected
‧ The source signal may be weak.
‧ Your provider may be experiencing difficulties.
‧ Check your input connections.
.