Memorizing Channels - Planar XP37W User Manual

Memorizing Channels

Your TV can memorize and store all of the available channels for both standard broadcast (antenna)
and cable channels. After the available channels are memorized press the △ or ▽ button to
view stored channels. You can also view any channel (even non-memorized) by directly entering
the channel digits via the remote control.
There are three steps to memorizing channels:
1. Selecting a TV signal input source
2. Memorizing the available channels (automatically)
3. Adding/Erasing channels (manually)
CONTROL
BUTTONS
28
Selecting the TV Signal Source
Before your television can begin to memorize
available channels, you must specify the type of signal
source that is connected to the TV (i.e., an antenna or
a cable system).
1. Press the TV button to set the main display to TV
mode. Press the Menu button to display TV from
the main menu.
2. Press the △ or ▽ button to select the SOURCE
option.
3. Press the ◁ or ▷ button to select between
Antenna, AIR , CATV , HRC , IRC source signals.