Page 2
Planar your support question. Talk to a Customer Service Representative To contact Planar's Customer First(TM) Technical Support Service call 1.866.PLANAR.1 (866.752.6271). This service is available 5am - 5pm Pacific Time, 8am - 8pm Eastern Time, Monday through Friday. Contact Us 24x7 Online Technical Support: http://www.planar.com/support...
Page 3
The information contained in this document is subject to change without notice. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be reproduced, translated to another language or stored in a retrieval system, or transmitted by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission.
Register Your Planar Products Today Thank you for choosing Planar. To assure you receive all the benefits of your Planar product and services, register your Planar product today. Visit our website to register your product at http://www.planar.com/support/ product_registration.html Cables, Replacement Lamps and...
Page 6
Servicing Do not attempt to service your TV yourself because opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. Replacement parts When replacement parts are required, make sure that the service technician uses replacement parts specified by the manufacturer that have the same characteristics as the original part.
End of life directives Your new TV contains materials which can be recycled and reused. At the end of your TV’s life, specialized companies can dismantle the discarded TV to concentrate the reusable materials and to minimize the amount of materials to be disposed of.
Button Description Press the arrows to move down, up, left, or right in the on-screen menu. ENTER Press the ENTER button to confirm changes or to toggle options on and off in the on-screen menu. MENU Press to open the on-screen menu. FAVORITE Press to toggle the Favorite/Normal mode.
To connect cable TV with a converter/descrambler box: • Use the following illustration to connect a converter/descrambler box. (The RF switch and the signal splitter are not provided.) Set the RF switch to the A position to watch unscrambled channels using your TV remote control.
4 Press the INPUT button repeatedly to select the VIDEO5 input source, then press PC to toggle from HDMI to VGA. RS-232 (for service) RS-232 AUDIO Audio cable VGA cable Using your TV Turning your TV on and off To turn your TV on and off: 1 Make sure that the power cord is connected to your TV and a power outlet.
For example, if the main channel number is 8, the sub-channel number might be 8-1, 8-2, or 8-3. To select a sub-channel: 1 Press the number buttons for the main channel (for example 8). 2 Press the – button, then press the sub-channel button (for example 1).
Viewing closed captions Note To select or customize digital closed captions, use the Digital Captions or Digital Closed Caption sub-menus in the Feature menu. To view closed captions: • Press the CCD button repeatedly to select a closed caption option. You can select: •...
Rating Description Restricted. Not suitable for children under 17 years of age unless accompanied by a parent or guardian. NC-17 Not suitable for children under 17 years of age. Adults only. Canadian MPAA Ratings Rating Description Children Children 8 years and above General audience Parental guidance suggested.
On-screen Options menu Video Contrast–Increases the picture level to adjust the white areas of the picture. Decreases the (Options may vary picture level to adjust the black areas of the in different picture. (0 ~ 100) modes.) Brightness–Increases the brightness to add more light to dark areas of the picture.
Troubleshooting Warning Do not try to repair your TV yourself. Refer all service to a qualified service technician. Symptom Possible solution No power • Make sure that the power cord is connected to your TV and a power outlet. • Unplug the power cord, wait 60 seconds, then plug the cord back in and turn on your TV.
Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Planar may void the user’s authority to operate the equipment. Cables Connections to this device must be made with shielded cables with metallic RF/EMI connector hoods to maintain compliance with FCC Rules and Regulations.
Need help?
Do you have a question about the XP19W and is the answer not in the manual?
Questions and answers