Configuration; Infrastructure Information - Siemens SIMATIC S7-1500 Configuration Manual

3 Configuration

Configuration
3
3.1

Infrastructure information

Required components
For the use of the "Shared Device" function, the following components are
required:

A CPU 1516-3 PN/DP (Project 1)

A CPU 1511-1 PN (Project 2)

Two SIMATIC MEMORY CARDs

AN ET 200SP station as IO device with "Shared Device" function with the IM
155-6PN ST interface module and any modules (DI, DO, AI, AO, ...)

A 24V power supply with cable connector and terminal block plug (the modules
can also be operated with a shared power supply)

DIN rail with mounting accessories for the S7-1500

A PG/PC with the configuration tool "STEP 7 V13 SP1" installed
Software package
Install STEP 7 V13 SP1 on your PC/PG.
Setting up the infrastructure
Connect all the components involved in this solution via the integrated PROFINET
interface.
Figure SharedDeviceKonfig-109741600
S7-1516-3 PN/DP
24 V
SharedDeviceKonfig
Entry ID: 109741600, V1.0,
ET 200SP with IM 155-6PN ST
24 V
PROFINET
P1R
P2R
11/2016
S7-1511-1 PN
24 V
8