JVC KD-S785 Service Manual page 7

Removing the control switch board
Prior to performing the following procedure, remove
the front panel assembly.
1. Remove the four screws G attaching the rear cover
on the back of the front panel assembly.
2. Unjoint the eleven joints e with the front panel and
the rear cover.
3. Remove the control switch board on the back of the
front panel.
(See Fig.10 ~ 12)
Front panel
Joint e
G
Rear cover
G
Fig.10
Joint e
Joint e
Fig.11
Front panel
Control switch board
Fig.12
KD-S785
G
G
Joint e
Rear cover
1-7