Network Setup - Wiseup WIFI02 User Manual

-1× DC 5V 1A Power Adapter
-1× Wall Bracket Mount
-1× Card Reader
III. Get Camera Ready
3.1. Please make sure the camera is fully charged, the Micro SD card has been formatted
already, and is securely fitted into the camera's SD card slot, or it will not work. We
recommend that you use a SDHC Class 10 Micro SD card.
3.2. Slide the Power Switch to the ON position. The red and blue indicator lights will come
on and flash for 10 seconds or so. When the red indicator light goes out and the blue one
remains solid, it means the camera's WIFI signal is ready.
3.3. If you need the camera to work 24/7 days, please connect it to an outlet AC power
supply using the USB cable and power adapter included. Once the camera is connected
to outlet AC power supply, the blue or red indicator light will come on whether the Power
Switch lies at the ON position or not.
IV. Network Setup
4.1. Install Plug&Play or P2PCamViewer APP on Smartphone or Tablet PC
Go to your App store or Google Play, search for "9527" and then install "Plug&Play" on
your Android phone or tablet PC, or "P2PCamViewer" on your iPhone or iPad.