Pairing Success; Pairing Multiple Devices; Nfc Pairing - Creative Sound Blaster Jam User Manual

3. Pairing success

When the headset and the Bluetooth device are paired, the LED will flash slowly in blue to indicate
successful pairing before returning to its default / last status.

Pairing Multiple Devices

The Sound Blaster JAM is able to pair up to two smart devices at the same time! To have the second
device paired, repeat steps 1 to 3. If a user wishes to pair the headset with a third smart device, one of
the two devices that are currently paired with the headset has to be unpaired.
Note:
Only one of the devices is able to play music at one time. The last paired smart device takes
precedence over the other device.
When there's an incoming call, the call takes precedence over audio playback -- music fades out and
the ringtone will be heard.
NFC Pairing
Bring your NFC-enabled device close (20mm) to the NFC zone / Multifunction button. The LED will
blink slowly in blue and a 3-note tone will be heard to indicate successful pairing. Play music from your
device and experience superb audio realism and stunning 3D surround effects.
If you wish to unpair the devices, simply tap your NFC device on the headset again.
Setting Up Your Headset
6