Setting Up Your Headset; Using Your Headset While Charging; Step 1: Charge Your Headset - Creative Sound Blaster Jam User Manual

Setting Up Your Headset

Set up your headset in three simple steps:
1. Charge your headset
2. Connect your headset
3. Install the software
Step 1: Charge Your Headset
You are recommended to charge your headset before it is used for the first time. Connect your headset
to your computer using the USB cable, or connect it to a power supply via an adapter (available
separately). The LED will light in red when charging.

Using Your Headset While Charging

During subsequent charges, you can use your headset while it charges. The LED will light in red while
charging and return to its last status when fully charged.
You can also check the status of the battery via the battery indicator at the top right corner of the Sound
Blaster JAM Control Panel. Please refer to Using the Software for details.
Note:
The low battery tone will start beeping to inform users of its status 15 minutes before the headset is
completely powered off.
Setting Up Your Headset
4