Connecting The Display; Unfolding The Stand Base - Planar PQ150 Manual

Connecting the Display

Before setting up the monitor, ensure that the power to the monitor, the
computer system, and other attached devices is turned off.

Unfolding the stand base

1.
Lay the monitor on a cushion or piece of soft cloth with its front side
facing upward.
2.
Grasp the stand firmly with both hands as shown in the picture and
unfold the base by swiveling it out. Significant force is required.
Folding the stand base
1.
Lay the monitor on a cushion or piece of soft cloth with its front side facing
downward.
2.
Grasp the stand firmly with two hands and rotate the base while pulling out its
underside.
Caution : If you try to fold the stand base in any other way, be careful to avoid
Important
If the stand base is wrenched with excessive force when
being folded or unfolded the monitor may be damaged.
Handle with care.
Adjust the angle of the stand base holding the monitor screen
with two hands.
catching your hand at the rear of the unit or you may sustain injury.
A3