Universal Remote Control URC-SR3 Owner's Manual page 12

STEP 5: Check your work. Once you've
entered the code number and the component
has turned off, press the POWER [ON] button
to turn the component back on.
Next, test the VOLUME and CHANNEL buttons
(or PLAY and STOP buttons for DVD) to make
sure they all work.
For example, perhaps your TV turned off
with code number 147, but the volume
controls did not work properly. In this case,
try the next code number listed for that
component.
Repeat Steps 4 and 5 until you find a perfect
match.
STEP 6: Save your work. Once you've entered a
correct code that turns off your component, you
must save it. Press the Component button you
just activated one more time to save the code
number. The Component light will blink two
times to confirm that the code was successfully
stored.
IMPORTANT: If you have tried all the setup
codes in the list and the component still did
not turn off, either the Auto-Search Set-up
(page 12) or the Learning Method (page 14)
will help you activate your component. If you
need assistance, contact our technical support
center at 1-800-901-0800 or techsupport@
universalremote.com, and we'll be glad to
walk you through it.
We love to talk!
PLEASE CONTACT OUR TECHNICAL
SUPPORT CENTER.
E-MAIL: techsupport@UniversalRemote.com
Phone: 1-800-901-0800 (9:00AM - 6:00PM
EST Monday - Friday)
PLEASE DO NOT RETURN
THIS PRODUCT TO THE STORE
Page | 11