Products Introduction; Before Starting Setup; Start Setup - Sricam SP009 Qucik User Manual

Products Introduction

IR Sensor
Lens
Microphone

Before starting setup

Make sure of the following:
- Your router supports the 2.4GHz frequency band (802.11b/g/n).
- Your router DHCP is enabled.
- Your smartphone is connected to the Internet with a WLAN/Wi-Fi that the camera will connect with.
- You know the WLAN/Wi-Fi password.( No special characters in the password and Wi-Fi SSID such
as @#$%^&*).
- Your smartphone, camera, and router should be within about 8 feet during setup. After your camera
is set up,you can move the camera to your preferred location(the configurations are saved to camera
system）

Start setup

Step1.
Sricam App Installation
Go directly to Step3 if the ifcam app is already download and registered in your smartphone.
Scan the QR code to download the"ifcam" App.
Search"ifcam"on Google Play or iOS App Store
English
Speaker
Reset
MicroSD card Slot
DC 5V Power Slot
-1-
Reset