Page 2
Thank you for purchasing our products, if you have any questions or needs, please contact us. Interface description NVS001 NVS004 Audio 12V Adapter 12V Adapter Audio HDMI USB Mouse USB Mouse HDMI 1. Install wireless NVR Note: A. Disconnect the power from the NVR before installing a hard disk drive (HDD). B.
Page 3
Remove the insulator before use (3) Remove the battery insulation paper. (4) Connect the data cable and power cable to HDD. (5) Fasten the screws on the bottom to fix the HDD. (6) Re-install the cover of the NVR and fasten screws. 1-1-2.
Page 4
1-2. Connection NVR Connect the mouse to the USB port of the NVR. Connect to the monitor via an HDMI / VGA cable. Connect to the internet (Router or Switch) via a net-cable (Local access please skip this step) Connect to the DC 12V adapter and turn on the power. Connection as below: Internet DC adapter...
Page 5
2. NVR Login Follow the NVR startup wizard to complete the login settings. (NVR default password: 888888) admin Login Auto Login 3. Network Setting When the network shows an abnormal state 3-1. Check if your network cable is properly connected. 3-2.
Page 6
4. SriHome APP Setup Step 1. SriHome App Installation Method 1: Scan the QR code to download “SriHome” App. Method 2: Search“SriHome”on Google Play or iOS App Store. Android Step 2. Register & Login SriHome App Step 3. Add the Device to App You can scan the Device Next...
Page 7
Note: A. The device ID is affixed to the label of the video recorder shell. B. Enter Desktop/Main Menu--My Device--Version--Serial NO. My Device My Device PlayBack Version Record Channel 16 Control Panel Camera System 1.03.06720672.87020171.T000.22 Extra Info 1.15.205254565 Build Date 2021-03-05 16: 55:25 Intemet C8:24:02:3e:ca:cf...
Page 8
6. Add the Camera Note: 1. The camera and the wireless NVR have been paired at the factory. 2. Pair is only required for debugging and adding new cameras. Pairing Button Net-cable 6-1. Pair via Pairing Button (6-1) 6-1-1 Power on the camera, it takes 1 minute to start. 6-1-2 Right-click on the screen--camera--press and hold the camera's pairing button, and at the same time click the “pair”...
Need help?
Do you have a question about the NVR Wireless Kit and is the answer not in the manual?
Questions and answers