D-Link DFL-600 Manual page 33

Hide thumbs Also See for DFL-600:

Table of Contents

DMZ Settings

The DMZ Settings screen allows you to Enable and Disable the DMZ port

on the DFL-600 and to specify the IP address and Subnet Mask that the DMZ

port will use. The default DMZ IP address is 192.168.1.1 with a subnet mask

of 255.255.255.0.

Global Address

IP Address

Subnet Mask

DMZ Host Settings

This is the DMZ Global Address assigned to the

DFL-600 by your Network Administrator.

Every DMZ connection will go through this

global address to access the DMZ internal

computer.

This is the Global IP address assigned to the

DFL-600 by your Network Administrator. If a

range of IP addresses have been assigned, then

you will have to pick one IP address to connect

to the DMZ device.

This is the subnet mask corresponding to the

DMZ IP address specified above. It must be the

same subnet mask as assigned to the LAN ports.

Table of Contents