Cisco Aironet 1200 Series Upgrade Manual page 4

802.11 b/g (2.4-GHz) Radio Upgrade
Instructions
This section provides a step-by-step procedure for installing or replacing an
802.11b or g 2.4-GHz radio card. The section contains the following topics:
•
"Overview" section on page 4
• "Unpacking the Radio" section on page 5
•
"Opening the Access Cover" section on page 6
•
"Removing the Blank Spacer Card" section on page 8
• "Removing a 2.4-GHz Radio Card" section on page 11
•
"Installing a 2.4-GHz Radio Card" section on page 13
Overview
The following operations summarize the 2.4-GHz radio upgrade procedure:
1. Remove all cables and power connections from the access point.
2. Follow standard electrostatic discharge (ESD) procedures.
3. Place the access point on an ESD protected work surface.
4. Open the access point's 2.4-GHz radio access cover.
4