Cisco Aironet 1200 Series Upgrade Manual page 11

4. Remove the card from the mini-PCI connector.
For instructions on installing the radio card, go to the
Radio Card" section on page
Removing a 2.4-GHz Radio Card
Follow these steps to remove a 2.4-GHz radio card from your access point.
Caution
The internal access point components and the 2.4-GHz radio
can be damaged by ESD from improper handling.
Caution The antenna connectors can be damaged if you use a pair of
long-nose pliers to remove them.
Caution
To avoid damaging the antenna wire assemblies, handle them by
their connectors.
1. Use your fingers to carefully remove the antenna wire connectors from
the 2.4-GHz radio card.
13.
"Installing a 2.4-GHz
11