Easy Start-Up Guide - ABB ACS255 User Manual

8
ACS255 – IP66 (115-480V Switched Variants)
Local Speed Potentiometer
The local speed potentiometer will adjust
the output frequency from minimum
(Parameter 2007, default setting = 0Hz) to
maximum (Parameter 2008, default
setting = 60Hz)
Run Reverse / Off / Run Forward Switch
With the factory parameter settings, this
switch allows the drive to be started in
the forward and reverse operating
directions. Alternative switch functions
can be programmed, such as
Local/Remote, hand / Off/ Auto, see page
23.
Local Power
disconnect with lock
out provision
Fuses, Cable Sizes :
- Fuse Rating recommendation values given on page 46
- Cable size recommendation values given on page 46
- Always follow local and national codes of practice.
Supply Voltage :
- 115, 230, 400, 480 Volts
- 1 or 3 Phase
- Check the drive rating
information on page 46
Fuses
Motor Connections
-
Motor Nameplate Details
-
-
-

EASY START-UP GUIDE

Mechanical Mounting
- Information can be
found on page 17
Keypad operation can be
found in section 7 and 8
Motor Cable Sizes
- Cable size
recommendation values
given on page 46
Check for Star or Delta connection
according to the motor voltage rating
(See page 22)
Enter the motor rated voltage in
parameter 9905
Enter the motor rated current in
parameter 9906
Enter the motor rated frequency in
parameter 9907