Optoma ML330 User Manual page 36

USING THE PROJECTOR
Level 1
Personalize
Software Update
About
Note:
Options are available only if "Security" in "WIFI" > "Wi-Fi hotspot" > "Config wifi hotspot" menu is set
‡ *
1
to "WPA2 PSK" or "WPA PSK".
Options are available only if "Through the network to be automatic gain time date" parameter in
‡ *
2
"System" > "Date time setting" menu is "Off".
Select the input source manually
You can configure the projector to detect the input source automatically (please refer to page 28) or set the input
source manually. To set the input source manually, do the following:
1. Tap the , ,
2. After selecting the tab, tap the
Note: If the input source cannot be found, you are prompted to return to Android menu (Home screen).
Select the "OK" option and tap the
36 English
Level 2 Level 3
Input Source Setup
NO Signal Auto
Shutdown
Net update
Local update
Regulatory Model
System Version
Wireless MAC
address
Cable MAC address
Memory Information
(or/total)
Software Version
Hardware Version
, or key to select either the "HDMI" tab or the "AV" tab.
Level 4
key to set the input source.
key to confirm.
Level 5 Value
Auto
HDMI
AV
On
Off
LDMLSSZ
4.4.4
by Model
by Model
by Model
by Model
by Model