Optoma ML330 User Manual page 28

USING THE PROJECTOR
Ethernet Connection
‡ Enable/Disable Wired Ethernet: Turn the wired Ethernet connection setting on or off.
‡ The automatic acquisition IP address (DHCP): Turn obtaining the network parameters automatically
option on or off.
Note: If the "The automatic acquisition IP address" option is turned on, the "IP address", "Subnet
mask", "Default gateway", "First DNS", and "Second DNS" options are inactive.
‡ IP address: Input the IP address.
‡ Subnet mask: Input the subnet mask.
‡ Default gateway: Input the default gateway.
‡ First DNS: Input the primary DNS.
‡ Second DNS: Input the secondary DNS.
Note:
After the modifi cations are done, select "save" and tap the
tap the key to discard the changes.
‡ Personalize: Tap the
± Wallpaper Settings: Select a wallpaper for the background from the Live Wallpapers gallery or
the Wallpaper gallery.
± Bootanimation Settings: Confi gure custom boot animation settings, such as enable or disable
loading custom boot animation, select a custom boot animation or create a custom boot
animation, reboot and view custom boot animation, and many more.
± Boot Setup: Set how the projector is powered on. The available options include "Button Power
On" (requires pressing the Power button to start the projector) and "Auto Power On" (the
projector is powered on automatically after the power is supplied to the projector).
± Input Source Setup: Select the default input source. The available options include "HDMI" and
"AV". If you select "AUTO" option then the projector detects the input source automatically.
± NO Signal Auto Shutdown: Enable or disable shutting down the projector if the input signal is
not detected.
28 English
Wired Connection
Enable/Disable Wired Ethernet
The automatic acquisition IP address
IP address
Subnet mask
Default gateway
First DNS
Second DNS
save
key to change the wallpaper, set the boot animation, and many more.
key to save the changes or select "Cancel" and
Cancel
Choice OK Back