Sylvania DVL1000G Service Manual page 14

(S-10)
[11] Plate Holder
3. How to Eject Manually
1. Turn the unit over.
2. Insert the shaft less than a diameter of 3 mm (e.g. screwdriver) straightly into the opening as shown.
3. Turn the shaft along with the opening clockwise.
4. Repeat steps 2 and 3 until the tray will open.
5. Pull the tray slowly manually
(S-11)
[12] Main
PCB Holder
Fig. D8
B
Turn the shaft along with
the opening clockwise.
1-5-4
View for B
Rear
Shaft
(e.g. screwdriver)
Opening
Front
E6A22DC