Making The Electrical Connections - HAMPTON BAY Colonial Bamboo User Manual

Figure 4
Motor wires
Ball/downrod
assembly
Ceiling
canopy
Locking pin
Tighten
screws
firmly
Figure 5
5.
Ceiling
mounting
plate
AC Wires
Ceiling
canopy
Screws provided
Canopy
by the outlet box
cover
Pin in
locked Figure 6
position
Canopy
cover
Hanger
bracket
Collar cover
Hanger pin
Motor collar
Figure 7
Making the Electrical
UL Listed
Connections
electrial
box
Remember to disconnect the power.
Posts in the
outlet box
Follow the steps below to connect the fan to your
household wiring. Use the wire connecting nuts
supplied with your fan. Secure the connectors with
Hanger
electrical tape.
bracket
strands or connections.
Washers
Step 1 Connect the fan supply (black) wire to the
black household supply wire as shown in Figure 8.
Hook
Step 2. Connect the neutral fan (white) wire to the
white neutral household wire. (Fig. 8)
Step 3 Connect the fan ground wire (green) to the
household ground wire.
Step 4 After connecting the wires, spread them
apart so that the green and white wires are on one
Safety cable
side of the outlet box and the black wires are on the
other side.
Step 5 Turn the connecting nuts upward and push
the wiring into the outlet box.
Make sure there are no loose
(Fig. 8)