Access ATOM Document Reader Getting Started Manual page 2

Warnings
This manual contains important information regarding the installation and operation of the ATOM ® Document
Reader. For safe and reliable operation of the imager, installers must ensure that they are familiar with, and
fully understand, all instructions contained herein.
Warranty
Access Ltd warrants that this product shall be free from defects in workmanship and materials for a period of
one year from the date of original purchase. If the product should fail to operate correctly in normal use during
the warranty period, Access will replace or repair it free of charge. No liability can be accepted for damage
due to misuse or circumstances outside Access' control. Access will not be responsible for any loss, damage
or injury arising directly or indirectly from the use of this product. Access' total liability under the terms of this
warranty shall in all circumstances be limited to the replacement value of this product.
Radio Frequency Energy
European EMC Directive 2014/30/EU (Non- RFID version)
This product complies with the requirements of this directive by meeting the following standards:
EN 55022:2010: Information technology equipment. Radio disturbance characteristics. Limits and
methods of measurement.
BS EN 55024:2010+A1:2015: Information technology equipment. Immunity characteristics. Limits
and methods of measurement.
European Radio Equipment Directive 2014/53/EU (RFID version)
This product complies with the requirements of this directive by meeting the following standards:
EN 301 489-1 V1.9.2: Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio equipment and services; Part 1 Common technical requirements.
EN 302 291-1 V1.1.1: Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range
Devices (SRD); Close Range Inductive Data Communication equipment operating at 13,56 MHz; Part 1:
Technical characteristics and test methods.
EN 302 291-2 V1.1.1: Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range
Devices (SRD); Close Range Inductive Data Communication equipment operating at 13,56 MHz; Part 2:
Harmonized EN under article 3.2 of the R&TTE Directive.
FCC Compliance Statement (United States)
This equipment generates, uses and can radiate radio frequency energy and if not installed and used
properly, that is, in strict accordance with the manufacturer's instructions, may cause interference to radio
communication. It has been tested and found to comply with the limits for a class A computing device in
accordance with the specifications in Subpart J of part 15 of FCC rules, which are designed to provide
reasonable protection against such interference when the equipment is operated in a commercial
environment. Operation of this equipment in a residential area may cause interference, in which case the user
at his own expense will be required to take whatever measures may be necessary to correct the interference.
Changes or modifications not expressly approved by the manufacturer could void the user's authority to
operate the equipment.
The RFID version contains FCC approved Access-IS Smartcard Module FCC ID: ZERNSM01.
Canadian Department of Communications RFI statement
This equipment does not exceed the class A limits for radio noise emissions from digital apparatus set out in
the radio interference regulations of the Canadian Department of Communications.
Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables aux
appareils numériques de la classe A prescrites dans le règlement sur le brouillage radioélectriques publié par
le ministère des Communications du Canada.
The RFID version contains Industry Canada approved Access-IS Smartcard Module IC: 9653A‐NSM01.
Page 2 of 20 Copyright © Access-IS 2017