Table of Contents
Advertisement
3.5 Document reader software status messages
Messages display in bottom left corner of ADRS. Use these messages to check the status of the
reader and software and to help diagnose problems.
Table 4: Document reader software status messages
Message
ATOM is ready
Scanning
Writing Multiple Image file
Processing complete
Automatic reader not started
No Document Reader Connected ATOM is disconnected from the host and software; the camera
Could not set Windows Handle
for windows....
Initialised
MRZ decoding failed
Page 16 of 20
Description
ATOM is switched on, connected to the host and ready to read a
document.
ATOM is acquiring images.
ATOM is acquiring images and saving these to disk.
Set this mode from the software's Configuration tab.
ATOM has processed the document.
An attempt to start the reader was made, but it failed. This
generally indicates that the automatic detection of documents
placed on the scanner is not enabled (on the Configuration tab).
The setting is enabled by default.
will not work. Check USB and power connections.
Another instance of ADRS is already running. Ensure that you
close ADRS before restarting.
The scanner is initialised, but the reader has not started correctly.
Make sure the scanner is powered up and switched on.
ATOM has detected an MRZ string that is not correctly formatted.
Move the mouse cursor over the MRZ summary icon to display
details of the failure.
Copyright © Access-IS 2017
Advertisement
Table of Contents
