Media Information; Inserting Media - Panasonic SC-PMX150 Owner's Manual

Bluetooth input level
®
If the sound input level from the Bluetooth
low, change the input level setting.
Preparation
• Connect a Bluetooth ® device.
1
Press [PLAY MENU] repeatedly to select "Input
Level".
2
Press [2, 1] to select the level and then press [OK].
"Level 0" ,. "Level i1" ,.
^---------------------------------------------J
Note:
• Select "Level 0" if the sound is distorted.
• The factory default is "Level 0".
Disconnecting a Bluetooth
1
While a Bluetooth device is connected:
®
Press [PLAY MENU] repeatedly to select
"Disconnect?".
2
Press [2, 1] to select "OK? Yes" and then press
[OK].
Note:
• You can also disconnect the Bluetooth
and holding [ -PAIRING] on the unit.
• The Bluetooth device will be disconnected if a different
®
audio source (e.g., "CD") is selected.
Bluetooth standby
®
When "SC-PMX150" is selected from a paired
Bluetooth device's Bluetooth
® ®
on automatically from standby mode and establish a
Bluetooth connection.
®
1
Press [SETUP] repeatedly to select
"BLUETOOTH Standby".
2
Press [2, 1] to select "On" and then press [OK].
Note:
• To turn the function off, select "Off" in step 2.
• The factory default is "Off". If this function is set to "On", the
standby power consumption will increase.
12

Media information

• Please be aware that Panasonic accepts no
device is too
®
responsibility for the loss of data and/or information.
Compatible iPhone/iPad/iPod
iPhone 7 Plus / iPhone 7 / iPhone SE /
iPhone 6s Plus / iPhone 6s / iPhone 6 Plus / iPhone 6 /
iPhone 5s / iPhone 5c / iPhone 5 / iPhone 4s
iPad Pro (9.7-inch and 12.9-inch) / iPad Air 2 /
"Level i2"
iPad Air / iPad (3rd and 4th generation) / iPad 2 /
iPad mini 4 / iPad mini 3 / iPad mini 2 (iPad mini
with Retina display) / iPad mini
iPod touch (5th and 6th generation)
device
® iPod nano (7th generation)
• For the latest information, visit
http://panasonic.jp/support/global/cs/audio/
(This site is in English only.)
Note:
• Do not connect models not listed in the above. Unexpected
behaviour may occur.
• Compatibility depends on the software version. Update
your iPhone/iPad/iPod to the latest software before using it
device by pressing
®
with this unit.
• Read the User Guide of the iPhone/iPad/iPod for the
operating instructions.
Compatible USB devices
• This unit does not guarantee connection with all USB
devices.
• FAT12, FAT16 and FAT32 file systems are supported.
menu, this unit will turn
• This unit supports USB 2.0 High Speed.
• USB devices with storage capacity of more than 32 GB
cannot work in some conditions.
• Supported file formats and extensions:
MP3 (".mp3"), AIFF (".aiff"), FLAC (".flac"),
WAV (".wav"), AAC (".m4a"), DSD (".dff", ".dsf")
• Depending on how you create the files, they may not
play in the order you numbered them or may not play
at all.
Note:
• Files are defined as tracks and folders are defined as
albums.
• This system can access up to:
- 800 albums (including root folder)
- 8000 tracks
- 999 tracks in one album
Compatible CD
• This system can play back discs that conform to the
CD-DA format.
• This system can play back CD-R/RW with CD-DA or
MP3 format content.
• The unit may not be able to play some discs due to the
condition of the recording.
• Before playback, finalize the disc on the device it was
recorded on.
• If the disc includes both MP3 and normal audio data
(CD-DA), the unit plays the type recorded in the inner
part of the disc.
• This unit cannot play files recorded using packet write.
• Disc must conform to ISO9660 level 1 or 2 (except for
extended formats).
Note:
• Some CD-R/RW cannot be played because of the
condition of the recording.
(as of March 2017)
• MP3 files are defined as tracks and folders are defined as
albums.
• This system can access up to:
- CD-DA: 99 tracks
- MP3: 999 tracks, 255 albums (including root folder)
• Recordings will not necessarily be played in the order you
recorded them.

Inserting media

CD
OPEN/CLOSE
Press [CD/USB] repeatedly to select "CD".
Label facing up
OPEN/CLOSE