Advertisement
Suppress beep tones. Indicator C lights while
suppressing.
- Beep
Keyboard beep.
- Beep
Volume of keyboard beep.
- Roger beep
Transmit a beep on keying off the transmitter.
- DTMF tones
Define length of DTMF tones. Adjust value with
number keys.
- ZVEI tones
Define length of ZVEI tones used for 5-tone
calling. Adjust value with number keys.
Tone burst
Define audio frequency used for opening
repeaters.
Callsign generator
- Callsign generator
The transceiver may transmit text in Morse. 'Hold
TX' causes the transmitter to remain keyed until
the text is finished.
- After call
Callsign may be transmitted immediately after 5-
tone sequence.
- Callsign
Define callsign transmitted during normal
transmissions. See Heading 10.
- Callsign generator
Define Morse speed (0-40).
Adjust value with number keys.
- Callsign generator
Callsign may be sent to loudspeaker
- Callsign generator
Callsign generator is activated *** seconds after
the transmitter is keyed. Adjust value with number
keys.
- Callsign generator
Callsign generator is activated every *** seconds.
Adjust value with number keys.
User
- LCD backlight
LCD backlight is switched off automatically ***
seconds after last action.
- My number
Define user's personal 5-tone code. The
transceiver produces an alarm tone on reception
of this code.
On / Off
Volume: ---
On / Off
*** ms
*** ms
*** Hz
Submenu!
On / On (hold TX) / Off
On / Off
<text>
Speed: ***
Only TX / TX & LSP
After TX: *** sec
Every:
*** sec
Submenu!
Off after:
*** s
***
- Reply
This code may be transmitted when the personal
code is received.
- Reply
Enable/disable replying to personal code.
- Key acceleration
Define acceleration of up and down key. The
longer the key is pressed, the faster frequencies
will be stepped through.
- Keys
If a key is held pressed, its function may be
automatically repeated.
- Settings
When 'Update' is selected, all settings are stored
on switching off. 'Fixed' allows settings to be
stored manually using the next menu item. When
switched on, the transceiver employs the
previously stored settings.
- Settings
This allows you to store settings.
- Memory
This allows the contents of the 24C65/64
EEPROM to be copied.
- <Language>
Select one of three languages.
- Status
If the error indicator F is visible, the cause of the
problem may be called up by pressing the
button.
18. Calls
The transceiver allows up to 10 different tone
sequences to be stored. These tone sequences
may be used to selectively call up stations.
Calling:
- Press
H
- Press 0
- Select the number/station to be called
- Press #
Defining the codes:
- Press
H
- Press 0
- Select the number/station to be called.
- Press
H
- Enter name, see Heading 10
- Press
H
to confirm
- Enter the number
- Press
H
to confirm
The
H
button is used to confirm entries. Cancel
entry with any other key.
- 6 -
***
Yes / No
Accel.: X
Repeat / Once
Update / Fixed
Store
Copy now
Nederlands / English /
Deutsch
Diagnosis
H
Display:
(Select Function )
(Call:
)
Display:
(Select Function )
(Call:
)
(Name:
)
(Nr.
)
Hide quick links:
Advertisement
