No.ma387<Rev.003>)1 - JVC KD-BT11J Service Manual

3.2.14 Removing the loading gear 1, loading gear 2, loading gear 3 and feed gear 1
(See Fig.22)
• Remove the top cover, base board and chassis unit.
(1) From the bottom side of the chassis unit, pull out the load-
ing gear 1.
(2) Take out the loading gear 2.
(3) Pull out the loading gear 3.
(4) Pull out the feed gear 1.
3.2.15 Removing the loading gear 4, loading gear 5 and
loading gear 6
(See Fig.22)
• Remove the top cover, base board and chassis unit.
(1) From the bottom side of the chassis unit, remove the screw
K attaching the loading gear bracket.
(2) Take out the loading gear bracket and remove the loading
gear 5 and loading gear 6 from the loading gear bracket.
(3) Pull out the loading gear 4.
3.2.16 Removing the change gear 2, change gear 3A and
change gear 3B
(See Figs.22 and 23)
• Remove the top cover, base board and chassis unit.
(1) From the bottom side of the chassis unit, pull out the load-
ing gear 1. (See Fig.22.)
(2) Pull out the change gear 2. (See Fig.22.)
(3) Pull out the change arm. (See Fig.22.)
(4) Move the change gear plate rivet assembly in the direction
of the arrow 2 to remove the section av of the change gear
plate rivet assembly from the chassis unit while moving the
change lock lever in the direction of the arrow 1. (See
Fig.23.)
(5) Pull out the change gear 3A and change gear 3B from the
change gear plate rivet assembly. (See Fig.23.)
3.2.17 Removing the cam plate L assembly
(See Fig.24)
• Remove the top cover, base board, chassis unit, clamper as-
sembly, top plate assembly and loading roller assembly.
(1) From the left side of the chassis unit, slide the cam plate L
assembly in the direction of the arrow.
(2) Remove the cam plate L assembly from the slots aw of the
chassis unit.
1-22 (No.MA387<Rev.003>)
Loading gear bracket
Loading gear 3
Feed gear 2
Feed gear 1
Change arm
Chassis unit
Fig.22
Change gear plate rivet assembly
Change gear 3B
2
1
Chassis unit
Change lock lever
Fig.23
Chassis unit
aw
Cam plate L assembly
Fig.24
Loading gear 6
Loading gear
bracket
Loading
gear 5
K
Loading gear 4
Loading gear 1
Loading gear 2
Change gear plate
rivet assembly
Change
gear 3A
Change gear 3B
Change gear 3A
av
aw