Operating Your Refrigerator (Model Obc33Ssd) - Avanti OBC32SS Instruction Manual

Avanti products refrigerator user manual
Hide thumbs Also See for AVANTI OBC32SS:
Table of Contents

Advertisement

Available languages

Available languages

OPERATING YOUR REFRIGERATOR (MODEL OBC33SSD)

As a natural result of condensation, in summer months or areas of high humidity, the glass door
may build up moisture on the outside. Just wipe it away.
It is recommended you install the Refrigerator in a place where the ambient temperature is between
50ºF - 100ºF (10º - 38ºC ). If the ambient temperature is above or below recommended
temperatures, the performance of the unit may be affected. For example, placing your unit in
extreme cold or hot conditions may cause interior temperatures to fluctuate. The range of 36º - 64º F
(2º - 18º C) may not be reached.
 CONTROL PANEL (MODEL OBC33SSD – ONLY)
The unit turns on automatically once plugged in.
Your beverage center is equipped with an electronic display that once any button is pressed the
display window will light on and will automatically light off two (2) minutes after the last button was
pressed.
Alarm Indicator
Compressor Run
Indicator
Temperature Display
SET Button
Temperature
UP / DOWN
Light Switch
IMPORTANT SAFEGUARDS
CONTROL PANEL FEATURES / DESCRIPTIONS
Alarm mode: In the event there is a fault in the unit, an Alarm indicator
will appear in the area shown above on the control panel.
If at any time the following messages are shown in the display window,
consult an Avanti Products Authorized Service Center.
PROBE ERROR
LOW TEMP
HIGH TEMP
When the unit's compressor is running, the control panel will display a
moving "FAN" icon. Once the compressor stops running the icon will
also stop moving.
The set temperature and current average temperature of the unit will be
displayed in this area as shown above.
Use this button to activate the temperature setting mode and again to
confirm the selected temperature setting.
Use these buttons to select the appropriate temperature. Temperature
setting will either advance or decrease each time you press the
respective button.
The interior light can be operated manually by pressing the ON/OFF
button on the control panel. The light will automatically turn itself OFF
after 5 minutes.
NOTE: Avoid extended use of the light as the heat generated by the light
bulb can raise the interior temperature of the unit and affect the
temperature of the items stored.
12

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Obc33ssd

Table of Contents

Save PDF