Installing The Leveling Legs Or Casters - Avanti OBC32SS Instruction Manual

 INSTALLING THE LEVELING LEGS OR CASTERS.
 TWO OR MORE PEOPLE REQUIRED FOR THIS PROCESS

Four casters are included with your refrigerator. They are ideal for rolling the unit from place
to place outdoors. If a mobile installation is chosen, you must install the casters.
a) Tip the unit to the left as shown in the illustration (¾ foot clearance from the floor to the top of
the unit).
b) Remove the leveling legs, and screw in one of the casters with the foot brake in the front
screw hole and one of the casters without the foot brake in the back screw hole.
c) Tip the unit to the right and repeat the steps above.
d) The unit should be level at all times, if you need to fix the level, adjust the wheel height by
turning it counter-clockwise to increase the height and clockwise to reduce it.
e) Repeat the steps on all casters until the unit is fully level.
9