Pioneer VSX-D908S Operating Instructions Manual page 27

Î
S0URCE RECEIVER
MULTI SYSTEM
OPERATION OFF
DVD/LD TV/SAT VCR1 VCR2
MULTI CONTROL
MD/
CD TUNER TV CONT
TAPE1
CLASS MPX BAND DIRECT ACCESS
¶ 7 3 8
- -
+ +
TUNING STATION
1 ¡ 4 ¢
-
+
CHANNEL
DTV ON/OFF DTV MENU
1 2 3
5 6
4
8 9
7
GUIDE EXIT
0
ENTER
+10 DISC
TV
TV VOL VOLUME
TV CONTROL
TV FUNC
EFFECT
MENU MUTE
/CH SEL
FUNCTION
3,4
ENTER
SIGNAL
SELECT
2/dts
SYSTEM
ADVANCED STANDARD
SETUP
REMOTE
MIDNIGHT DSP STEREO
SETUP
DIGITAL NR
DIGITAL MULTI PROCESSING AMPLIFIER
REMOTE CONTROL UNIT
3
Specify the type of speakers you connected. See the
explanations below for the meaning of each size.
1 Press 2 or 3 to move the hand to LARGE, SMALL, or NO (you
can't select NO for the FRONT speakers).
2 Press ∞.
3 Repeat 1 and 2 for each speaker.
Depending on your choices the sound will be routed
differently, as explained here.
FRONT (default setting is LARGE)
• Select small to send bass frequencies to the sub woofer.
• Select large if your speakers will reproduce bass frequencies
effectively or if you did not connect a sub woofer.
(If you select small for the front speakers the sub woofer will
automatically be switched YES. Also,the center and surround
speakers cannot be set to large if the front speakers are set to
small. In this case, all bass frequencies are sent to the sub
woofer.)
CENTER (default setting is LARGE)
• Select large if your speaker will reproduce bass frequencies
effectively.
• Select small to send bass frequencies to the other speakers or
sub woofer.
• If you did not connect a center speaker, deselect it. In this case,
the center channel is output from the front speakers.
SURROUND (default setting is LARGE)
• Select large if your speakers will reproduce bass frequencies
effectively.
• Select small to send bass frequencies to the other speakers or
sub woofer.
• If you did not connect surround speakers deselect them. In this
case, the sound of the surround channels is output from the front
and center speakers.
SUB WOOFER (default setting is YES)
• Leave it selected if you connected a sub woofer.
• If you did not connect a sub woofer deselect it. In this case, the
bass frequencies are output from the front or surround speakers.
• Choose the PLUS setting if you want stronger reproduction of
deep bass sounds.
• If you select PLUS the bass frequencies that would normally
come out the front and center speakers are all routed to the sub
woofer.
4 Select EXIT with the 5¥∞ buttons and press ENTER to
return to the SYSTEM SETUP MENU.
Next, proceed to CHANNEL DELAY below.
If you want to change a setting before proceeding
Simply use the arrow buttons to go back.
Surround Sound Set Up
27