Preferred Shutdown - NETGEAR ReadyNAS 102 Hardware Manual

ReadyNAS OS 6 Desktop Storage Systems
When connected to a host that is powered on, the EDA 500 automatically powers on. The EDA 500 detects
a powered-on host through the eSATA link.
You can also power on the system by pressing the Power button on the front panel of the system.

Preferred Shutdown

If possible, always unmount the EDA 500 volumes from the host before shutting down the EDA 500.
Use the ReadyNAS local admin page to gracefully shut down the EDA 500. For information about how to
gracefully shut down the EDA 500 using the ReadyNAS local admin page, see the ReadyNAS OS 6 Software
Manual, which is available at netgear.com/support/product/ReadyNAS_OS_6.
Forced Shutdown
Perform a forced shutdown only if the storage system is not responding.
To perform a forced shutdown:
• Flip the Power switch on the back panel of the system to the Off position.
NETGEAR EDA 500
161