Netgear Readynas 716X; Power On And Shut Down - NETGEAR ReadyNAS 102 Hardware Manual

Table 1. ReadyNAS 102 indicator descriptions
Indicator
Power button and LED
Disk LEDs (1, 2)
Disk activity LED
Rear panel Ethernet port
LEDs

Power On and Shut Down

This section describes how to power on and shut down your system. If you must shut down the system, use
one of the preferred shutdown methods whenever possible.
ReadyNAS OS 6 Desktop Storage Systems
Description
Press this button to turn on the ReadyNAS. The LED indicates these states:
• On. Powered on.
• Blinking. Booting or shutting down.
• Off. Powered off.
An LED on the front panel of the storage system is associated with each drive bay.
The disk LEDs have these states:
• On. Power is on and the disk is operating normally.
• Blinking. The disk was removed, failed, or is resynchronizing.
• Off. The drive bay is empty.
The disk activity LED has these states:
• On. At least one disk is present.
• Blinking. A disk is active.
• Off. All disks are idle.
Two LED status indicators are built into this port, one green and one amber. They
indicate port speed and activity as follows:
• Green on, amber off. 1000 Mbps connection speed, no activity.
• Green blinking, amber off. 1000 Mbps connection speed, activity.
• Green off, amber on. 10 Mbps or 100 Mbps connection speed, no activity.
• Green off, amber blinking. 10 Mbps or 100 Mbps connection speed, activity.
• Green off, amber off. No connection.
NETGEAR ReadyNAS 102
19