ABB 83210-AP-500 Manual page 15

ABB-Welcome
Mounted on the wall
1. Affix the bottom of the device to the wall.
2. Latch the upper part of the device onto its bottom part.Place the upper side of the
device on the lock-in lugs and then press the bottom side onto the bottom part of
the device until it is caught by the clamp.
Mounted with flush-mounted box
1. Affix the bottom of the device to the existing flush-mounted box.
2. Latch the upper part of the device onto its bottom part.Place the upper side of the
device on the lock-in lugs and then press the bottom side onto the bottom part of
the device until it is caught by the clamp.
The installation of the indoor station is now complete.
Pos: 94 /B usch-J aeg er (Neus truk tur )/M odul -Strukt ur/O nline -Doku me ntatio n/Steu er mod ule - Onlin e-Dok ume ntati on ( -- > F ür alle Dok ume nte <- -)/ +++ ++ ++ +++ ++ S eiten umb ruch + +++ ++ ++ +++ + @ 9\m od_ 126 8898 668 093 _0. docx @ 521 49 @ @ 1
| — 15 —